How to Slow Down Driver Comms, Turn Around Delay Pulling Rate Weintek EBPro

Weintek USA official site -
Call for pricing and availability 425-488-1100

Turn around delay:
While sending the next command to the device, HMI will delay the sending according to the time interval set in [Turn around delay]. This may influence the efficiency of the communication between HMI and the device. Default value is “0”.


Note: If the device used is SIEMENS S7-200 Series, it is recommended to assign “5” to [Turn around delay] and “30” to [Send ACK delay].  If the interface used is [Ethernet], click [Device Properties] - [Settings] and the [IP Address Settings] dialog box opens. Please set correct device IP address and port number.
If the interface is [USB], no further setting is required. Please check the settings in [Device Properties].  If the interface is [CAN (Controller Area Network) Bus], please see “Device Connection Guide” for “CANopen” and import the .eds device file.

weinview,ezware,ezwareplus,